LIGHTING CONTACTORS AND POWER TAPS
We build custom high capacity contactors to suit your application needs. These controls are typically used in parking lots, intersections, highway entrance ramps and sub stations where several outdoor lights are wired to one location. All of contactors and power taps shown below are built in the USA with the highest quality available in the market today.
SkyPower with 7-Pin Power Tap
- POWER - Draws power from streetlight with 7-pin power tap
- CONNECT - Provision to mount cell modem for Internet connectivity
- MONITOR - Add any NLC to monitor power consumption of ancillary load
- REBOOT - Send 'OFF' and 'ON' command to reboot ancillary device
Please note that you will be redirected to our Ripley Brand
Double Tap with 7-Pin Power Tap
- POWER - Draws power from streetlight with 7-pin power tap
- MONITOR - Add any NLC to monitor power consumption of ancillary load
- REBOOT - Send 'OFF' and 'ON' command to reboot ancillary device
Please note that you will be redirected to our Ripley Brand
Custom Enclosure and Pedestal Contactors
- From 30-100A load and from 120-480 VAC operations
- Zero Cross Switching available to reduce inrush current
- Photocontrol or Astronomical Timer control available
- Other options such as HOA switch, MOVs, breakers, pole mounts, etc
FP63300 - Socket Mounted Controls
- Fits in standard 4-Jaw meter socket
- These utility grade units include deluxe surge protection
- Ideal for parks, marinas, parking lots, malls, industrial parks
- Dusk to Dawn operations with factory setable turn on levels
FPN4AFA - 4 Jaw Meter Socket
- Fits standard 4-Jaw meter photocontrols
- Base is durable black phenolic
- Ideal for parks, marinas, parking lots, malls, industrial parks
- Rated for 30A per pole, 3000W tungsten, 3000VA HID ballast
FPN250 - 30A Lighting Contactor
- Flat surface or pole mounted 30A relay
- Compact design ideal for parking lot applications with multiple lights
- Weatherproof NEMA 3R housing
- Single pole, normally open contact, rated for 3000W, 2400VA load
FPN270 - 30A Lighting Contactor with Receptacle
- Flat surface or pole mounted 30A relay with receptacle for a photocontrol
- Compact design ideal for parking lot applications with multiple lights
- Weatherproof NEMA 3R housing with ANSI C136 3-pin receptacle
- Single pole, normally open contact, rated for 3000W, 2400VA load
FP280 - OWL Series Converted Power
- Fits on any ANSI C136 receptacle
- Ideal for powering several auxiliary devices such as cameras, radios, etc.
- Will supply a variety of PoE, AC-AC or AC-DC output voltages
- 3-Pin or 7-Pin versions available to accept any photocontrol on top
FP283A - Continuous Auxiliary Power Tap
- Fits on any ANSI C136 receptacle
- Ideal for powering auxiliary devices such as cameras, radios, etc.
- Will supply constant 120VAC output
- 3 Pin or 7 Pin versions available to accept any photocontrol on top
CL120 - Switched Dusk to Dawn Auxiliary Power
- Fits on any ANSI C136 receptacle
- Ideal for powering Christmas / Holiday Lights
- Works with 120VAC luminaires only (105-130 VAC)
- Dusk to Dawn photocontrols operations
FP285A - Timed & Switched Auxiliary Power
- Fits on any ANSI C136 receptacle
- Ideal for powering Christmas / Holiday Lights
- Works with 120VAC luminaires only (105-130 VAC)
- Aux power shuts down at midnight, Dusk to Dawn luminaire operations
FPS284 - Pass Through Spacer
- Will fit on any ANSI C136 receptacle and adds around 2.5" in height
- Ideal for applications where the photocontrol needs to rest higher
- Available in 3 pin or 7 pin versions
- Durable polycarbonate housing
